Suitable for use on the fender, boot, hatch, engine bay or other flat exterior/interior surfaces.

Features

• 3D rotary engine-style logo design
• Metal construction
• Adhesive-backed for simple installation
• Suitable for exterior or interior use
• Multiple colours and sizes available
• Ideal for Mazda performance and rotary-inspired builds

Size

Approx. 52mm x 36mm

Size may vary slightly depending on the selected version.

Available Colours

Depending on stock availability:

• Chrome
• Black
• Red
• Gold
• Grey

Available in small and large versions where listed.

Suitable For

Universal Mazda accessory. Commonly used with:

• Mazda 3 / Axela
• Mazda 6 / Atenza
• Mazda CX-5
• Mazda CX-7
• Mazda CX-9
• Mazda RX-8
• Mazda MX-5
• Mazdaspeed 3 / MPS
• Mazdaspeed 6 / MPS
• Other Mazda models

This is a universal decorative emblem, so please check the dimensions and intended mounting location before ordering.

What You Receive

• 1x Metal Rotary Engine Logo Emblem

Installation

Clean and dry the mounting surface thoroughly before installation.

For best adhesion:

1. Remove wax, dirt and grease from the area.
2. Test-position the emblem before removing the backing.
3. Remove the adhesive backing.
4. Press firmly into position.

Avoid washing the vehicle immediately after installation to allow the adhesive time to bond.

Please Note

This is an aftermarket decorative accessory and is not a genuine Mazda part.

Please confirm the size, colour and mounting location are suitable for your vehicle before ordering.

Genuine Mazda HID headlight assemblies for the 2nd generation Mazda 3 / Axela BL.

Ideal for replacing damaged, faded, cracked, or water-damaged factory HID headlights while retaining the original Mazda fit and appearance.

Features

• Genuine Mazda OEM headlight assemblies
• Factory HID / Xenon type
• Designed for Mazda 3 / Axela BL Gen 2
• Direct replacement for compatible factory HID-equipped vehicles
• Correct factory mounting points
• Genuine OEM lens, housing and internal reflector design

Vehicle Fitment

Suitable for selected:

• Mazda 3 BL
• Mazda Axela BL
• Approximately 2009–2013 models
• Factory HID-equipped vehicles

Important: Mazda used different headlight assemblies depending on year, model, body style, market and specification.

Please compare your existing headlight, plugs and part number before ordering.

If unsure, send us your VIN/chassis number and photos of your existing headlight and we can help check compatibility.

HID Fitment

These are for vehicles originally fitted with factory HID/Xenon headlights.

They may not be a direct plug-and-play replacement for vehicles originally fitted with standard halogen headlights, as wiring, control modules, ballasts and other components may differ.

Condition / Included Parts

Headlight condition and included components may vary depending on the option selected.

Unless specifically stated, please do not assume HID bulbs, ballasts, control modules or other removable electronic components are included.

Check the selected variation or contact us if you need a specific component included.

Before Ordering

Please confirm:

• Left or right side required
• Factory HID/Xenon fitment
• Plug configuration
• Mounting points
• Mazda part number where available

Photos can be sent to us for comparison before ordering.

Johnnyparts NZ

Mazda parts specialists based in Auckland.

Online only, no retail showroom or walk-in service.

For fitment enquiries, message us with your VIN/chassis number and photos of the existing headlight.

Replacement fuel tank / fuel pump retaining lock ring used to secure the fuel pump or fuel sender assembly to the fuel tank.

A damaged, cracked or worn retaining ring can prevent the fuel pump assembly from being correctly secured or sealed.

Part Number

BN8F-42-167
BN8F42167

Supersedes / replaces:
GP9A-42-167 / GP9A42167

Fits Selected Mazda Models

• Mazda 2
• Mazda 3
• Mazda 6 / MazdaSpeed 6 / Mazda 6 MPS
• Mazda RX-8
• Selected Mazda Atenza models

Fitment varies by model, year and specification.

Important

Please check your existing part number or contact us with your VIN / chassis number if you are unsure of compatibility before ordering.

Please Note

This listing is for the fuel tank retaining / lock ring only unless otherwise stated. The fuel pump, sender unit and tank seal are separate parts.

Common Names:
Fuel Pump Lock Ring • Fuel Tank Retainer Ring • Fuel Sender Retaining Ring • Mount Plate Union Nut • Fuel Pump Retainer Nut

OEM Reference: BN8F-42-167