Add a subtle Mazda performance-inspired touch to your vehicle with this 3D metal rotary engine logo emblem.
Suitable for use on the fender, boot, hatch, engine bay or other flat exterior/interior surfaces.
🔧 Features
- 3D rotary engine-style logo design
- Metal construction
- Adhesive-backed for simple installation
- Suitable for exterior or interior use
- Multiple colours and sizes available
- Ideal for Mazda performance and rotary-inspired builds
📏 Size
Approx. 52mm x 36mm
Size may vary slightly depending on the selected version.
🎨 Available Colours
Depending on stock availability:
- Chrome
- Black
- Red
- Gold
- Grey
Available in small and large versions where listed.
🚗 Suitable For
Universal Mazda accessory. Commonly used with:
- Mazda 3 / Axela
- Mazda 6 / Atenza
- Mazda CX-5
- Mazda CX-7
- Mazda CX-9
- Mazda RX-8
- Mazda MX-5
- Mazdaspeed 3 / MPS
- Mazdaspeed 6 / MPS
- Other Mazda models
This is a universal decorative emblem, so please check the dimensions and intended mounting location before ordering.
📦 What You Receive
- 1x Metal Rotary Engine Logo Emblem
🛠 Installation
Clean and dry the mounting surface thoroughly before installation.
For best adhesion:
- Remove wax, dirt and grease from the area.
- Test-position the emblem before removing the backing.
- Remove the adhesive backing.
- Press firmly into position.
Avoid washing the vehicle immediately after installation to allow the adhesive time to bond.
⚠️ Please Note
This is an aftermarket decorative accessory and is not a genuine Mazda part.
Please confirm the size, colour and mounting location are suitable for your vehicle before ordering.
